SN74ACT244NE4 Overview

There is a neat PDIP package used in buffer. A total of 2 elements are used. 20 terminations with different functions are available on this transceiver. An input voltage of 5V is required. ACT family part. With the electrical part, 20 pins are set. Through Hole applications are suitable for it. There are 20 pins on digital buffer. The bus transceiver has 2 ports. For each element, there are 4 bits. In particular, automotive buffer is a type of Bus Driver/Transceivers. When the electronic component is quiescent, it uses 4μA. Power supplies with a 5V volt rating are recommended. The package is usually shaped like a TUBE. Users should apply 5V supply voltage to the lectronic component to run it safely and stably. As low as -40°C can be tolerated by it. You shouldn't let the amibient temperature get higher than 85°C when using this buffer. It outputs 24mA when it is in low-level mode, which is the default. There is a possibility of the electronic component conducting -24mA of current when it is in high-level output mode. It is recommended that the voltage used to run this electrical component is at least 4.5V. It is rated for a maximum supply voltage of 5.5V. ICs that use BUS DRIVER logic are known as BUS DRIVER logic transceivers. There is sufficient data to make 8 outputs from it. ENABLE LOW control technology allows the logical driver to start up.

SN74ACT244NE4 Features

Bus Driver/Transceivers
High Level Output: 24mA
Low Level Output: -24mA
BUS DRIVER Logic IC

SN74ACT244NE4 Applications

There are a lot of Texas Instruments
SN74ACT244NE4 Buffers & Transceivers applications.

• Wireless modems
• Remote controls
• Wireless network systems
• Satellite communications networks
• Ethernet circuitry
• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC