SN74ACT373DWR Overview

Package 20-SOIC (0.295, 7.50mm Width) includes it. Tape & Reel (TR) is the way it is packaged. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. The 74ACT series of FPGAs is the one this FPGA belongs to. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. This type belongs to the 74ACT373 family. It operates with a supply voltage of 5V. 20 pins are available on it. It is a member of the ACT family of electronic devices. The 20 pins are designed into it. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. It consists of 8 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is appropriate for TR. It features maximum flexibility in design due to 24mA output current. A high level of efficiency is achieved by maintaining the supply voltage at 5V. In order to operate properly, its maximum power current (ICC) should be 0.04mA.

SN74ACT373DWR Features

20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies

SN74ACT373DWR Applications

There are a lot of Texas Instruments SN74ACT373DWR Latches applications.

• Relay
• Parallel Output
• Communication systems
• Multistage ripple counting
• Data acquisition
• BCD counting
• Shift Registers
• Instrumentation
• Relay replacement
• Synchronous frequency dividers