SN74ACT374DWE4 Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). As part of the package Tube, it is embedded. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74ACT series. Its output frequency should not exceed 160MHz Hz. A total of 1 elements are present. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. The 74ACT374 family contains it. A voltage of 5V is used to power it. There is 4.5pF input capacitance for this T flip flop. In terms of electronic devices, this device belongs to the ACTfamily of devices. Surface Mount mounts this electronic component. This board is designed with 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. This flip flop is designed with 8 Bits. 8 circuits are used to achieve its superior flexibility. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. As a result of its output current of 24mA, it is very flexible in terms of design. A total of 3input lines have been provided.

SN74ACT374DWE4 Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT374DWE4 Applications

There are a lot of Texas Instruments SN74ACT374DWE4 Flip Flops applications.

• Guaranteed simultaneous switching noise level
• Convert a momentary switch to a toggle switch
• Bounce elimination switch
• Buffer registers
• Clock pulse
• ESD protection
• Digital electronics systems
• ESD performance
• Memory
• Data storage