SN74ACT533DW Overview

It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. A package of Tube has been used. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations. The family it belongs to is 74ACT533. It operates with a supply voltage of 5V. The device is equipped with 20 pins. It is part of the family of electronic devices called ACT. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. 2 ports are available on this device. This part is included in Bus Driver/Transceiver. There are 5V power supplies required for this machine to operate. There are electronic circuits attached to the 3 input lines. The output current of 24mA makes it feature maximum design flexibility. High efficiency requires a voltage supply of 5V. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. The superior flexibility of the system is achieved through its use of 8 circuits. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.

SN74ACT533DW Features

20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies

SN74ACT533DW Applications

There are a lot of Texas Instruments SN74ACT533DW Latches applications.

• PCs and Notebooks
• Serial Output Register
• Synchronous frequency dividers
• Hammer
• General-Purpose Register
• Decade counting
• Lamp and Display (LED)
• Ring counter
• Sample and hold register
• Counting