SN74ACT533PW Overview

The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). Tube is the way in which it is packaged. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 4.5V~5.5V is used as the supply voltage for this device. The temperature at which the machine is operating is -40°C~85°C. The 74ACT series contains FPGAs of this type. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. 74ACT533 is its family. In order to operate it, the supply voltage must be 5V. 20 pins are provided. It is a member of the ACT family of electronic devices. With the design of the board, there are only 20 pins. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches includes this part. The system is powered by 5V sources. In the circuit, there are 8 input lines that are constituted by an electronic circuit. As the output current is 24mA, the design flexibility is maximum. For maximum efficiency, the supply voltage should be set to 5V. Its maximum current supply (ICC) reaches 0.04mA.

SN74ACT533PW Features

20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies

SN74ACT533PW Applications

There are a lot of Texas Instruments SN74ACT533PW Latches applications.

• Counter control
• Serial Output Register
• Double bus register system
• Display
• Automotive HEV/EV Powertrain
• Decade counting 7-segment decimal display
• Shift right with parallel loading
• Hammer Device Information
• Lamp and Display (LED)
• Up-Down Johnson