SN74ACT563PWR Overview

In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Packaged in the way of Tape & Reel (TR). The output it is configured with uses Tri-State. This electrical device has Logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C. The 74ACT series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. In this device, there are 20 terminations that have been designed. The family it belongs to is 74ACT563. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. It is part of the family of electronic devices called ACT. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. The device is powered by 5V power supplies. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Considering the reliability of this device, it would be a good candidate for TR. High efficiency requires maintaining the supply voltage at 5V. It consumes 4μA of quiescent current without being affected by external factors. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.

SN74ACT563PWR Features

20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT563 family
20 pin count
20 pins
5V power supplies

SN74ACT563PWR Applications

There are a lot of Texas Instruments SN74ACT563PWR Latches applications.

• Double bus register system
• A/D and D/A conversion
• Counting
• High-speed logic
• Address register
• Shift right register
• Watches
• Frequency dividing
• Display driver
• Counter control