SN74ACT564PWR Overview

It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). It is contained within the Cut Tape (CT)package. This output is configured with Tri-State, Inverted. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74ACT series. You should not exceed 90MHzin its output frequency. In total, it contains 1 elements. It consumes 4μA of quiescent There have been 20 terminations. The 74ACT564 family contains this object. A voltage of 5V is used as the power supply for this D latch. This T flip flop has a capacitance of 4.5pF farads at the input. It is a member of the ACTfamily of D flip flop. It is mounted in the way of Surface Mount. There are 20pins on it. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. There are 8bits in its design. The superior flexibility of this product is achieved by using 8 circuits. Considering the reliability of this T flip flop, it is well suited for TR. It operates from 5V power supplies. This flip flop has a total of 2ports. For high efficiency, the supply voltage should be set to 5V. Featuring the maximum design flexibility, it has an output current of 24mA . This input has 3lines in it.

SN74ACT564PWR Features

Cut Tape (CT) package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT564PWR Applications

There are a lot of Texas Instruments SN74ACT564PWR Flip Flops applications.

• Balanced Propagation Delays
• Instrumentation
• Functionally equivalent to the MC10/100EL29
• Shift Registers
• Set-reset capability
• Synchronous counter
• Storage Registers
• Buffer registers
• 2 – Bit synchronous counter
• Registers