SN74ACT574NSR Overview

The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). The Tape & Reel (TR)package contains it. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at 4.5V~5.5Vvolts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74ACT series. A frequency of 110MHzshould not be exceeded by its output. A total of 1 elements are present. Despite external influences, it consumes 4μAof quiescent current. A total of 20terminations have been recorded. You can search similar parts based on 74ACT574. A voltage of 5V provides power to the D latch. Its input capacitance is 4.5pF farads. This D flip flop belongs to the family of ACT. In this case, the electronic component is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. Its superior flexibility is attributed to its use of 8 circuits. In view of its reliability, this D flip flop is a good fit for TR. The power supply is 5V. The D flip flop has no ports embedded. For high efficiency, the supply voltage should be kept at 5V. The 24mA output current allows it to be designed with the greatest amount of flexibility. It has 3lines.

SN74ACT574NSR Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT574NSR Applications

There are a lot of Texas Instruments SN74ACT574NSR Flip Flops applications.

• Data storage
• Dynamic threshold performance
• Clock pulse
• Computers
• Guaranteed simultaneous switching noise level
• Circuit Design
• Shift registers
• Asynchronous counter
• Modulo – n – counter
• Storage registers