SN74AHC273DGVR Overview

As a result, it is packaged as 20-TFSOP (0.173, 4.40mm Width). There is an embedded version in the package Cut Tape (CT). T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. Temperature is set to -40°C~125°C TA. D-Typedescribes this flip flop. JK flip flop belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 110MHz. D latch consists of 1 elements. During its operation, it consumes 4μA quiescent energy. 20terminations have occurred. Members of the 74AHC273family make up this object. The power supply voltage is 3.3V. There is 2.5pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as AHC/VHC/H/U/V. It is mounted in the way of Surface Mount. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 2V for normal operation. In order to achieve its superior flexibility, 8 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. There are 2/5.5V power supplies attached to it. With an output current of 8mA, it is possible to design the device in any way you want. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74AHC273DGVR Features

Cut Tape (CT) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies

SN74AHC273DGVR Applications

There are a lot of Texas Instruments SN74AHC273DGVR Flip Flops applications.

• Single Up Count-Control Line
• QML qualified product
• Counters
• Guaranteed simultaneous switching noise level
• Digital electronics systems
• ESD protection
• Divide a clock signal by 2 or 4
• Buffered Clock
• Bus hold
• Differential Individual