SN74AHC4066DBRG4 Overview

The electrical component comes in 14-SSOP (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. There are 14 terminations totally. A electrical component with 4 channels is capable of high-quality output. An 2.3V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 14 series. These analog multiplexers are built based on SPST - NO switching circuits. Use 74AHC4066 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 75Ohm. To find out what the 14 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Digital switch that provides Single power at a cost-effective price. 2V is the lowest voltage that should be fed to the electronic electronic part. Using only a single voltage supply, this analog switch requires 2V~5.5V voltage. A digital multiplexer may suffer damage if voltage is applied above 20μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. This switch operates within the bandwidth of 50MHz.

SN74AHC4066DBRG4 Features

4 Channels
Switch Circuit: SPST - NO
Bandwidth: 50MHz

SN74AHC4066DBRG4 Applications

There are a lot of Texas Instruments SN74AHC4066DBRG4 Analog Switches & Multiplexers ICs applications.

• Automotive applications
• PCMCIA cards
• Medical Instrumentation
• Modems
• Cable PC
• Battery-powered systems
• Signal routing between systems
• Remote wireless modules
• Audio and video switching
• Avionics