SN74AHC4066PW Overview

Presented in 14-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. A total of 14 terminations have been recorded. A electrical component with 4 channels is capable of high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. A total of 14 pins are injected into the body of the electronic part. A SPST - NO switching circuit is used for these analog switches. Try searching for the analog switch ic with 74AHC4066 if you are looking for variants. In this multiplexer, the internal resistance is 75Ohm. For details about the functions of 14 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 5.5V. A cost-effective Single supply type analogue multiplexer. It is recommended to use 2V as the lowest voltage for the electrical part. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. Putting voltage greater than 20μA on the multiplexer may cause damage. There are 50MHz bandwidths for data transfer.

SN74AHC4066PW Features

4 Channels
Switch Circuit: SPST - NO
Bandwidth: 50MHz

SN74AHC4066PW Applications

There are a lot of Texas Instruments SN74AHC4066PW Analog Switches & Multiplexers ICs applications.

• Data Acquisition Systems
• Precision test equipment
• Frame Relay Equipment
• Industrial and process control systems
• Digital cross connects (DSX-1)
• Avionics test equipment
• Cellular phones
• Fiber In The Loop (FITL)
• Microprocessor Controlled Analog Systems
• Cable Telephony – NIU, Set-Top Box, Home Side Box