SN74AHC573DWR Overview

In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. Packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. According to Surface Mount, this electronic part is mounted. It operates at a voltage of 2V~5.5V. It is -40°C~85°C at the operating temperature. The 74AHC series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74AHC573 family, it falls under that category. The device works with a voltage of 3.3V for its supply voltage. The 20 pind are equipped with it. This electronic device belongs to the family of AHC/VHC/H/U/V. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part is included in FF/Latches. There is a maximum voltage supply (Vsup) that reaches 5.5V. 2/5.5V power supplies are needed to operate it. (Vsup) should be greater than 2V. It consists of 3 input lines from which an electronic circuit can be built. The device's reliable performance makes it a good choice for TR. The maximal power current (ICC) supplied for its operation reaches 0.04mA.

SN74AHC573DWR Features

20-SOIC (0.295, 7.50mm Width) package
74AHC series
8 Bits
74AHC573 family
20 pin count
20 pins
2/5.5V power supplies

SN74AHC573DWR Applications

There are a lot of Texas Instruments SN74AHC573DWR Latches applications.

• Address register
• Display
• Shift Registers
• Automotive Cluster
• Counting
• Pattern Generators
• PCs and Notebooks
• Timers
• BCD counting
• Hammer Device Information