SN74AHC574PW Overview

The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. A package named Tubeincludes it. T flip flop is configured with an output of Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 115MHz Hz. D latch consists of 1 elements. T flip flop consumes 4μA quiescent energy. The number of terminations is 20. You can search similar parts based on 74AHC574. A voltage of 3.3V is used as the power supply for this D latch. A JK flip flop with a 3pFfarad input capacitance is used here. Devices in the AHC/VHC/H/U/Vfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. Vsup reaches 5.5V, the maximal supply voltage. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. 8 circuits are used to achieve its superior flexibility. The D latch operates on 2/5.5V volts. This flip flop has a total of 2ports. With an output current of 8mA, it is possible to design the device in any way you want. A total of 3input lines have been provided.

SN74AHC574PW Features

Tube package
74AHC series
20 pins
8 Bits
2/5.5V power supplies

SN74AHC574PW Applications

There are a lot of Texas Instruments SN74AHC574PW Flip Flops applications.

• Asynchronous counter
• Dynamic threshold performance
• Single Up Count-Control Line
• Storage Registers
• Individual Asynchronous Resets
• Synchronous counter
• Load Control
• Memory
• Buffered Clock
• Functionally equivalent to the MC10/100EL29