SN74AHC595NE4 Overview

In package PDIP, there is an embedded device. This chip has a total termination count of 16. 3.3V is the operating supply voltage of the part. The part consists of 1 elements. It has 16 pins. The mounting method should be Through Hole. This electronic component is classified as AHC/VHC/H/U/V. It's noted that the chip's operating supply voltage is in the range 5V. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. The pin count is 16. Using it below 85°C is recommended. In order to operate the device, the value should not fall below -40°C. It is used under the 5.5V supply voltage. It is used at a voltage greater than 2V. 9 output lines are available for operation.

SN74AHC595NE4 Features

With 16 pins
Operate supply voltage at 5V
With 9 output lines

SN74AHC595NE4 Applications

There are a lot of Texas Instruments
SN74AHC595NE4 Shift Registers applications.

• ROM Chips
• Flash Memory
• Cache memory in CPU
• Data Format Converters
• Data Processors
• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter