SN74AHCT273DGVR Overview

The flip flop is packaged in 20-TFSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. As configured, the output uses Non-Inverted. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. The FPGA belongs to the 74AHCT series. A frequency of 75MHzshould not be exceeded by its output. In total, it contains 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. You can search similar parts based on 74AHCT273. The power source is powered by 5V. A JK flip flop with a 2.5pFfarad input capacitance is used here. The electronic device belongs to the AHCT/VHCT/VTfamily. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. This device has the base part number FF/Latches. An electronic part with 8bits has been designed. Due to its superior flexibility, it uses 8 circuits. Considering the reliability of this T flip flop, it is well suited for TR. The power supply is 5V. In order to ensure high efficiency, the supply voltage should remain at 5V. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74AHCT273DGVR Features

Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
5V power supplies

SN74AHCT273DGVR Applications

There are a lot of Texas Instruments SN74AHCT273DGVR Flip Flops applications.

• ESCC
• Frequency division
• Computers
• ESD protection
• Power down protection
• Frequency Dividers
• Individual Asynchronous Resets
• QML qualified product
• Synchronous counter
• Communications