SN74AHCT273N Overview

The package is in the form of 20-DIP (0.300, 7.62mm). The Tubepackage contains it. Currently, the output is configured to use Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. Currently, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74AHCT series. A frequency of 75MHzshould be the maximum output frequency. There are 1 elements in it. Despite external influences, it consumes 4μAof quiescent current. A total of 20 terminations have been made. It is a member of the 74AHCT273 family. The D flip flop is powered by a voltage of 5V . A JK flip flop with a 2.5pFfarad input capacitance is used here. AHCT/VHCT/VTis the family of this D flip flop. Electronic part Through Holeis mounted in the way. As you can see from the design, it has pins with 20. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latch. An electronic part with 8bits has been designed. In order to achieve its superior flexibility, 8 circuits are used. A total of 5V power supplies are needed to run it. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With an output current of 8mA, it is possible to design the device in any way you want. It has 3lines.

SN74AHCT273N Features

Tube package
74AHCT series
20 pins
8 Bits
5V power supplies

SN74AHCT273N Applications

There are a lot of Texas Instruments SN74AHCT273N Flip Flops applications.

• Single Up Count-Control Line
• Buffer registers
• Set-reset capability
• Event Detectors
• ESCC
• Power down protection
• Load Control
• Test & Measurement
• Circuit Design
• Differential Individual