SN74AHCT373DW Overview

There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). Tube is the packaging method. There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. The voltage supply is 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. In the 74AHCT series, this FPGA is located. An electronic part with 8 bits is designed. A device with this design has 20 terminations. The family in which it belongs to is 74AHCT373. It operates with a supply voltage of 5V. There are 20 pins attached to it. It is a member of the AHCT/VHCT/VT family of electronic devices. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. It belongs to the subcategory of Bus Driver/Transceiver. There are 5V power supplies attached to it. There are electronic circuits attached to the 3 input lines. It features maximum flexibility in design due to 8mA output current. High efficiency requires maintaining the supply voltage at 5V. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. The superior flexibility of the system is achieved through its use of 8 circuits. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.

SN74AHCT373DW Features

20-SOIC (0.295, 7.50mm Width) package
74AHCT series
8 Bits
74AHCT373 family
20 pin count
20 pins
5V power supplies

SN74AHCT373DW Applications

There are a lot of Texas Instruments SN74AHCT373DW Latches applications.

• A/D and D/A conversion
• Buffer Storage
• Parallel data storage
• Counter control
• Shift left register
• Data acquisition
• Bus system register with enable parallel lines at bus side
• Frequency dividing
• Relay
• Automotive Cluster