SN74AHCT374DGVRG4 Overview
In the form of 20-TFSOP (0.173, 4.40mm Width), it has been packaged. The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74AHCTseries of FPGAs. You should not exceed 130MHzin its output frequency. The list contains 1 elements. There is 4μA quiescent consumption. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74AHCT374. A voltage of 5V is used as the power supply for this D latch. Input capacitance of this device is 4pF farads. In terms of electronic devices, this device belongs to the AHCT/VHCT/VTfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. This board has 20 pins. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 8bits in this flip flop. On the basis of its reliable performance, this D flip flop is well suited for use with TR. In order for the device to operate, it requires 5V power supplies. The flip flop contains 2ports. For high efficiency, the supply voltage should be set to 5V. A total of 8input lines have been provided.
SN74AHCT374DGVRG4 Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
5V power supplies
SN74AHCT374DGVRG4 Applications
There are a lot of Texas Instruments SN74AHCT374DGVRG4 Flip Flops applications.
- QML qualified product
- High Performance Logic for test systems
- Automotive
- Set-reset capability
- Buffer registers
- Event Detectors
- Power down protection
- Guaranteed simultaneous switching noise level
- Synchronous counter
- Convert a momentary switch to a toggle switch
