SN74AHCT573N Overview

In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. It is packaged in the way of Tube. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Through Hole. The voltage supply is 4.5V~5.5V. It operates at -40°C~85°C degrees Celsius. An FPGA in this series belongs to the 74AHCT family. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. 74AHCT573 is its family. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. It is part of the family of electronic devices called AHCT/VHCT/VT. The 20 pins are designed into it. Electronic parts are mounted using the Through Hole method. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. The device is powered by 5V power supplies. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. As the output current is 8mA, the design flexibility is maximum. High efficiency requires maintaining the supply voltage at 5V. Aquiescent current is consumed by 4μA without being affected by external forces. 8 circuits enable it to achieve high performance. Maximum power supply (ICC) for its operation is 0.04mA.

SN74AHCT573N Features

20-DIP (0.300, 7.62mm) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies

SN74AHCT573N Applications

There are a lot of Texas Instruments SN74AHCT573N Latches applications.

• Hammer
• Automotive Infotainment
• Parallel data storage
• Shift left with parallel loading
• Counting
• Timers
• Automotive HEV/EV Powertrain
• Data acquisition
• Digital bus buffer
• Shift right with parallel loading