SN74AHCT594NSRE4 Overview

This device can be found embedded within the package SOP. A total of 16 terminations can be found on the chip. Tape & Reel (TR) is the case in which it is packed. This part has an operating supply voltage of 5V. A total of 1 elements are present on this part. 16 pins are present on the device. It is recommended to mount by Surface Mount in order to get the best results. In this case, the electronic component belongs to the AHCT/VHCT/VT. It is noted that the operating supply voltage of this chip falls within the range 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED. A device capable of delivering voltage at 5V can be used. A total of 8 bits are present on an IC chip. In total, there are 16 pins on it. It should be used below 85°C. In order for this device to function, the value should not be less than -40°C. 5.5V is the supply voltage used. It is important to note that this supply voltage is higher than 4.5V. The number of output lines to be operated is 9.

SN74AHCT594NSRE4 Features

With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines

SN74AHCT594NSRE4 Applications

There are a lot of Texas Instruments
SN74AHCT594NSRE4 Shift Registers applications.

• Data Format Converters
• Data Processors
• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter
• Data manipulation
• Delay Line
• Generate time delay toward digital circuits