SN74AHCT594NSRG4 Overview

SOP is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. A Tape & Reel (TR) case is used to pack it. The part operates at 5V voltage. A total of 1 elements can be found on this part. It is equipped with a pin count of 16. It is recommended that the mount should be done by Surface Mount. There is an electronic component in the AHCT/VHCT/VT. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED. Devices with voltage delivery capabilities of 5V are available. A total of 8 bits are present on the IC chip. It has a total of zero pins. At temperatures below 85°C, it is recommended for use. Ideally, it should not fall below -40°C. A voltage of 5.5V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 4.5V. A total of 9 output lines are available for operation.

SN74AHCT594NSRG4 Features

With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines

SN74AHCT594NSRG4 Applications

There are a lot of Texas Instruments
SN74AHCT594NSRG4 Shift Registers applications.

• Data Processors
• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter
• Data manipulation
• Delay Line
• Generate time delay toward digital circuits
• Parallel data