SN74AHCT595N Overview

16-DIP (0.300, 7.62mm) is the package in which the device is embedded. 16 is the total number of terminations on the chip. A Tube case holds it. Voltage rating of the part is 5V. The device is equipped with 16 pins. As a general recommendation, mounting by Through Hole is recommended. Electronic components fall under the category of AHCT/VHCT/VT. In Through Hole, this component is mounted. There is a temperature range of -40°C~85°C. During operation, the voltage is within the range of 4.5V~5.5V. The 74AHCT series represents this electrical component. Similar parts can be found using the 74AHCT595 family. According to the specification, this chip's operating supply voltage falls within the range of 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A device with 1 input lines is available. A voltage of 5V can be delivered by it. Operating on 9 output lines is possible. The device runs its frequency at 115MHz.

SN74AHCT595N Features

With 16 pins
Mounted in Through Hole type.
Based on 74AHCT595 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines

SN74AHCT595N Applications

There are a lot of Texas Instruments SN74AHCT595N Shift Registers applications.

• Remote control holding register
• Interconnectors
• Pulse Extenders
• Data Processors
• 7-segment display control
• Generate time delay toward digital circuits
• Data manipulation
• Data Format Converters
• Cache memory in CPU
• Output expansion