An interesting SOP package is used. As part of the external packaging, this logical driver uses the Tape and Reel form factor. The 2 elements all play a role. Logic device with 20 different terminations. There is a requirement for 5V of supply voltage. This electronic part belongs to the ALS family of parts. This electric component comes with 20 pins. Surface Mount applications can be used with digital buffer. A 20-pin connector is used. An enhanced bus transceiver with 2 ports is available. Each element employs 4 bits. An electrical supply with 5V is recommended. Using 5V supply voltage on this electronic part is recommended for running the part safely and stably in a circuit. As low as 0°C is not a problem for it to operate. An ambient temperature of no more than 70°C should be used. The low-level output mode outputs 48mA. It is possible that the electronic part may conduct -15mA current in high-level output mode. It is strongly recommended that you use at least a voltage of 4.75V when operating this buffer. There is a maximum supply voltage rating of 5.25V. The BUS DRIVER logic bus transceiver is known as such. The amount of data required to make 8 outputs is sufficient. Voltage buffers using ENABLE LOW control start up automatically.
SN74ALS244C-1NSRG4 Features
High Level Output: 48mA Low Level Output: -15mA BUS DRIVER Logic IC
SN74ALS244C-1NSRG4 Applications
There are a lot of Texas Instruments SN74ALS244C-1NSRG4 Buffers & Transceivers applications.