There is an embedded version of it in package SOP. Tape and Reel is the packaging method. It is designed with 8 bits. A device with this design has 20 terminations. With the supply voltage set at 5V, it is able to operate. The 20 pind are equipped with it. There is a device in this electronic family called ALS. The device has 20 pins. It is mounted according to the Surface Mount method. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. There are 5V power supplies required for this machine to operate. A high efficiency supply voltage should be maintained at 5V. It achieves superior flexibility by using 8 circuits. As its maximal power current (ICC) reaches 27mA, it is able to operate. It has been set to 32mA for the low level output current. It has been set to -2.6mA for the high level output current. Operating temperatures should be below 70°C. 0°C is the minimum operating temperature. Voltages up to 5.5V can be supplied. There is a minimum supply voltage of 4.5V for it. It uses a logic IC of type BUS DRIVER. Its 24mA output current allows for maximum design flexibility.
