SN74ALS563BDWRG4 Overview

The 20-SOIC (0.295, 7.50mm Width) package contains it. It is packaged in the way of Tape & Reel (TR). It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. An FPGA in this series belongs to the 74ALS family. An electronic part with 8 bits is designed. This device has been designed with 20 terminations available. It belongs to 74ALS563 family. In order to operate it, the supply voltage must be 5V. 20 pins are available on it. It is part of the family of electronic devices called ALS. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is used to mount this electronic part. This device is equipped with 2 ports. The part is in the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 5.5V. The device is powered by 5V power supplies. There should be a voltage supply (Vsup) greater than 4.5V. Input Lines consist of electronic circuits, and there are 8. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. With an output current of 24mA, it is highly flexible in terms of design. There are also characteristics of BROADSIDE VERSION OF 533 associated with it. As its maximal power current (ICC) reaches 29mA, it is able to operate.

SN74ALS563BDWRG4 Features

20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS563 family
20 pin count
20 pins
5V power supplies

SN74ALS563BDWRG4 Applications

There are a lot of Texas Instruments SN74ALS563BDWRG4 Latches applications.

• Hammer Device Information
• Bus system register with enable parallel lines at bus side
• Up/down difference counting
• Parallel Input
• Four-bit storage with output enable
• Frequency
• Automotive Cluster
• Buffer register
• Serial Input
• Shift right with parallel loading