SN74ALS564BDWR Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. The output it is configured with uses Tri-State, Inverted. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. Currently, the operating temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74ALSseries of FPGAs. It should not exceed 30MHzin its output frequency. In total, it contains 1 elements. There is a consumption of 18mAof quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74ALS564. A voltage of 5V is used as the power supply for this D latch. A device of this type belongs to the family of ALS. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. There is a clock edge trigger type of Positive Edgeon this device. This device has the base part number FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 4.5V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The system runs on a power supply of 5V watts. The flip flop has 2embedded ports. It offers maximum design flexibility with its output current of 24mA. This input has 3lines in it.
SN74ALS564BDWR Features
Tape & Reel (TR) package
74ALS series
20 pins
5V power supplies
SN74ALS564BDWR Applications
There are a lot of Texas Instruments SN74ALS564BDWR Flip Flops applications.
- Convert a momentary switch to a toggle switch
- ESD protection
- Bus hold
- Patented noise
- Synchronous counter
- QML qualified product
- Matched Rise and Fall
- EMI reduction circuitry
- Data transfer
- Consumer
