SN74ALS576BDWRG4 Overview
The item is packaged in SOICcases. D flip flop is included in the Tape & Reel (TR)package. There is a TTLoutput configured with it. In total, it contains 1 elements. A total of 20 terminations have been made. A voltage of 5V is used to power it. An electronic device belonging to the family ALScan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 5V. As an additional reference, you may refer to electronic flip flop BROADSIDE VERSION OF 534. 24mAis set as the high level output current. There is no low level output current set at 24mA. Temperatures below 70°Care ideal for operating. Temperatures above 0°Cshould be used. The minimum voltage required for operation is 4.5V. 5.5Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 30MHz. It uses the logic IC BUS DRIVER. There are 1 functions associated with the JK flip flop. 20pins are provided on the D latch. It features maximum design flexibility due to the 24mA output current.
SN74ALS576BDWRG4 Features
Tape & Reel (TR) package
20 pins
5V power supplies
1 Functions
20 pin count
SN74ALS576BDWRG4 Applications
There are a lot of Texas Instruments
SN74ALS576BDWRG4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
