WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK
Subcategory
FF/Latches
Packing Method
TAPE AND REEL
Technology
TTL
Voltage - Supply
4.5V~5.5V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Supply Voltage
5V
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
74ALS667
Pin Count
24
Qualification Status
Not Qualified
Output Type
Tri-State
Circuit
8:8
Polarity
Inverting
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
5V
Supply Voltage-Min (Vsup)
4.5V
Load Capacitance
50pF
Number of Ports
2
Nominal Supply Current
79mA
Output Current
24mA
Number of Bits
8
Propagation Delay
20 ns
Turn On Delay Time
9 ns
Family
ALS
Logic Function
D-Type, Latch
Output Characteristics
3-STATE
Current - Output High, Low
400μA 8mA
Logic Type
D-Type Transparent Latch
Independent Circuits
1
Number of Output Lines
8
Height Seated (Max)
2.65mm
Width
7.5mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
SN74ALS667DWRE4 Product Details
SN74ALS667DWRE4 Overview
There is an embedded version of it in package 24-SOIC (0.295, 7.50mm Width). A package of Tape & Reel (TR) has been used. Tri-State is used for the output it is configured with. The Logic type of this electrical device is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. The voltage supply is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. There are a number of FPGAs in this series, including this one. The design of this electronic part is based on 8 bits. In this device, there are 24 terminations that have been designed. 74ALS667 is the family name of it. With a supply voltage of 5V, it operates. It is equipped with 24 pin count. It is part of the family of electronic devices called ALS. There are 24 pins on it. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches contains this part. 5.5V is the maximum voltage (Vsup) that can be supplied. A total of 5V power supplies are needed to run it. The supply voltage (Vsup) should be greater than 4.5V. Based on its reliable performance, this device is well suited to TAPE AND REEL. Due to its 24mA output current, it offers maximum design flexibility. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are also other characteristics of it, such as WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK.
SN74ALS667DWRE4 Features
24-SOIC (0.295, 7.50mm Width) package 74ALS series 8 Bits 74ALS667 family 24 pin count 24 pins 5V power supplies
SN74ALS667DWRE4 Applications
There are a lot of Texas Instruments SN74ALS667DWRE4 Latches applications.