SN74ALVCH16721DGGR Overview

56-TFSOP (0.240, 6.10mm Width)is the packaging method. D flip flop is included in the Cut Tape (CT)package. Tri-State, Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis required for its operation. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74ALVCHseries FPGA. It should not exceed 150MHzin terms of its output frequency. The list contains 1 elements. The number of terminations is 56. D latch belongs to the 74ALVCH16721 family. A voltage of 1.8V is used as the power supply for this D latch. A JK flip flop with a 3.5pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the ALVC/VCX/Afamily of devices. The electronic part is mounted in the way of Surface Mount. This board has 56 pins. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 20bits in this flip flop. Considering the reliability of this T flip flop, it is well suited for TR. There are 2 ports embedded in the flip flops. For high efficiency, the supply voltage should be kept at 3.3V. Its output current of 24mAallows for maximum design flexibility. There are no output lines on the JK flip flop. 1input lines are available for you to choose from. It consumes 40μA of quiescent current without being affected by external factors. Additionally, it is characterized by WITH CLOCK ENABLE. Currently, there are 20 channels available.

SN74ALVCH16721DGGR Features

Cut Tape (CT) package
74ALVCH series
56 pins
20 Bits

SN74ALVCH16721DGGR Applications

There are a lot of Texas Instruments SN74ALVCH16721DGGR Flip Flops applications.

• Counters
• EMI reduction circuitry
• Set-reset capability
• Modulo – n – counter
• QML qualified product
• Buffered Clock
• Control circuits
• Matched Rise and Fall
• ESD protection
• Supports Live Insertion