SN74ALVCH374DWRE4 Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. It is operating at a temperature of -40°C~85°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74ALVCH series. A frequency of 150MHzshould not be exceeded by its output. D latch consists of 1 elements. Despite external influences, it consumes 10μAof quiescent current. It has been determined that there have been 20 terminations. Members of the 74ALVCH374family make up this object. Power is provided by a 1.8V supply. Input capacitance of this device is 5pF farads. In this case, the D flip flop belongs to the ALVC/VCX/Afamily. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. It has a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 8bits. Using 8 circuits, it is highly flexible. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The flip flop has 2ports embedded within it. To operate, the chip has a total of 3 output lines.
SN74ALVCH374DWRE4 Features
Tape & Reel (TR) package
74ALVCH series
20 pins
8 Bits
SN74ALVCH374DWRE4 Applications
There are a lot of Texas Instruments SN74ALVCH374DWRE4 Flip Flops applications.
- Buffer registers
- Frequency division
- Shift Registers
- Frequency Dividers
- Test & Measurement
- Clock pulse
- Consumer
- Reduced system switching noise
- Asynchronous counter
- Balanced 24 mA output drivers
