SN74ALVTH16374VR Overview

As a result, it is packaged as 48-TFSOP (0.173, 4.40mm Width). The package Cut Tape (CT)contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. Powered by a 2.3V~2.7V 3V~3.6Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74ALVTH series. You should not exceed 250MHzin its output frequency. D latch consists of 2 elements. There is a consumption of 100μAof quiescent energy. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74ALVTH16374 family. The power supply voltage is 2.5V. This T flip flop has a capacitance of 3.5pF farads at the input. This electronic part is mounted in the way of Surface Mount. A total of 48pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 16bits is used in this application. As a result of its reliability, this D flip flop is ideally suited for TR. This flip flop has a total of 2ports. The 64mA output current allows it to be designed with the greatest amount of flexibility. It is designed with 1 output lines. It is reported that there are 3 input lines.

SN74ALVTH16374VR Features

Cut Tape (CT) package
74ALVTH series
48 pins
16 Bits

SN74ALVTH16374VR Applications

There are a lot of Texas Instruments SN74ALVTH16374VR Flip Flops applications.

• CMOS Process
• Functionally equivalent to the MC10/100EL29
• ATE
• ESCC
• Counters
• Storage registers
• Supports Live Insertion
• Guaranteed simultaneous switching noise level
• Data storage
• Common Clocks