SN74AS194DRG4 Overview

There is an embedded device in the package SOIC. 16 is the sum of the number of terminations in the chip. The case Tape & Reel (TR) contains it. A voltage of 5V is specified for the part's operating supply. 16 pins are available on the device. Surface Mount is recommended for mounting. Electronic components belong to the AS group. In terms of supply voltage, this chip operates within the range of 5V. This section has the following additional features: HOLD MODE. As far as the device is concerned, there are 6 input lines available. Voltage can be delivered at 5V by the device. IC chips contain a total of 4 bits. There are a total of 16 pins on it. Under temperatures below 70°C, it is recommended to use it. This device should not be operated with a value lower than 0°C. A voltage of this type is employed under 5.5V. It is necessary to use a voltage that is higher than 4.5V to provide this supply. It is necessary to operate 4 output lines of the system. In this device, there are a total of 1 circuits.

SN74AS194DRG4 Features

With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 4 output lines

SN74AS194DRG4 Applications

There are a lot of Texas Instruments
SN74AS194DRG4 Shift Registers applications.

• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter
• Data manipulation
• Delay Line
• Generate time delay toward digital circuits
• Parallel data
• Parallel to serial converter