SN74AS280NSRG4 Overview

This device is supplied in the SOP package. It is configured using 14terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. In total, there are 14pins on the component. In this case, it is packaged as Tape and Reel. Circuit components are connected by 14pins. It is mounted using the way of [0]. Initially, it appears to belong to the AS family. There is information in the device in the form of 9bits. As far as Pbfree code is concerned, the result may be yes. An important feature of this electronic device is [0]. Temperature grade COMMERCIALhas been selected for this device. As a result of the voltage source, there is 5V voltage. In order for it to operate, it requires a supply voltage of 5V . Long-term operation at 70°Cwith acceptable electrical stability is possible. It operates over a specified temperature range with a lower limit generally set to 0°C. The maximum voltage that can be applied to the device is 5.5V. It is possible to operate the device at as low a voltage as 4.5V. It is part of the Arithmetic Circuitsfamily of electronic components. It uses the logic IC type [0]. During normal operation, it consists of 1circuits. When a high-level voltage is applied to the output, there is -2mA current flowing into it. When a low-level voltage is specified, there is 20mA current flowing into the output terminal. In the output terminal, 20mA current flows.

SN74AS280NSRG4 Features

Embedded in the SOP package
ODD/EVEN PARITY GENERATOR
Operating supply voltage of 5V
PARITY GENERATOR/CHECKER as logic IC type

SN74AS280NSRG4 Applications

There are a lot of Texas Instruments
SN74AS280NSRG4 Counters & Dividers applications.

• Time-delay circuits
• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls