SN74AS533ADW Overview

Package 20-SOIC (0.295, 7.50mm Width) includes it. Tube is the way in which it is packaged. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. The voltage supply is 4.5V~5.5V. During operation, the temperature is set at 0°C~70°C. An FPGA in this series belongs to the 74AS family. Electronic parts with 8 bits are designed for this application. This device is designed with 20 terminations. As a member of the 74AS533 family, it falls under that category. With the supply voltage set at 5V, it is able to operate. With 20 pins, it is equipped. It is a member of the AS family of electronic devices. This board has 20 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. This device is equipped with 2 ports. This part can be found within the FF/Latches subcategory. The device is powered by 5V power supplies. There are electronic circuits attached to the 8 input lines. With 24mA, maximum design flexibility is ensured. For maximum efficiency, the supply voltage should be set to 5V.

SN74AS533ADW Features

20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS533 family
20 pin count
20 pins
5V power supplies

SN74AS533ADW Applications

There are a lot of Texas Instruments SN74AS533ADW Latches applications.

• Counter timers
• Sample and hold register
• Relay replacement
• Communication systems
• A/D converters
• Shift register
• Parallel-to-Serial Data Conversion
• Flip-flops
• Bus system register with enable parallel lines at bus side
• Up/down difference counting