SN74AS876DWG4 Overview
In the form of 24-SOIC (0.295, 7.50mm Width), it has been packaged. Package Tubeembeds it. The output it is configured with uses Tri-State, Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. The operating temperature is 0°C~70°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74AS series. It should not exceed 80MHzin its output frequency. In total, it contains 2 elements. There is a consumption of 142mAof quiescent energy. A total of 24terminations have been recorded. It is a member of the 74AS876 family. Power is supplied from a voltage of 5V volts. Electronic devices of this type belong to the ASfamily. A part of the electronic system is mounted in the way of Surface Mount. With its 24pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part designed with 8bits is used in this application. The flip flop has 2ports embedded within it. In order to ensure high efficiency, the supply voltage should remain at 5V. It offers maximum design flexibility with its output current of 48mA. There are 4 output lines in this JK flip flop. Furthermore, it has WITH PRESETas a characteristic.
SN74AS876DWG4 Features
Tube package
74AS series
24 pins
8 Bits
SN74AS876DWG4 Applications
There are a lot of Texas Instruments SN74AS876DWG4 Flip Flops applications.
- CMOS Process
- Shift Registers
- Divide a clock signal by 2 or 4
- EMI reduction circuitry
- Load Control
- Shift registers
- Buffer registers
- Control circuits
- Supports Live Insertion
- Latch-up performance
