SN74AUC2G66DCURG4 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-VFSOP (0.091, 2.30mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. 8 terminations have been made so far. Due to its 2 channels, the electrical component produces high-quality output. When a voltage supply of 1.1V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 8 pins. Multiplexers built on a SPST - NO switching circuit are built. Try searching for the analog switch ic with 74AUC2G66 if you are looking for variants. As far as internal resistance is concerned, it has 15Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 2.7V voltage to the switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 800mV. This digital switch can be operated with a current of 10μA. This analogue multiplexer requires a voltage of 0.8V~2.7V when it drains from a single voltage supply. Put voltage above 10μA on the multiplexer to cause damage. In this switch multiplexer, there are COMMON OUTPUT outputs available. 500MHz-bandwidths can be used to transfer data between multiplexers.

SN74AUC2G66DCURG4 Features

2 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 50MHz
Bandwidth: 500MHz

SN74AUC2G66DCURG4 Applications

There are a lot of Texas Instruments
SN74AUC2G66DCURG4 Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions