SN74AUC2G66YZPR Overview

Shipping overseas is convenient with the electronic component packed in 8-XFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. A total of 8 terminations have been recorded. By its 2 channels, the electronic component provides high-quality output. Powered by a 1.1V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 8 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with 74AUC2G66 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 15Ohm. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 2.7V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. There should be 800mV voltage fed to the electrical part below 800mV. The switch device would be able to operate with 10μA current. The voltage required by this switch device is 0.8V~2.7V, draining from a single voltage supply. When the digital multiplexer is charged above 10μA, damage can occur. COMMON OUTPUT outputs are utilized by this digital multiplexer. There are 500MHz bandwidths for data transfer.

SN74AUC2G66YZPR Features

2 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 50MHz
Bandwidth: 500MHz

SN74AUC2G66YZPR Applications

There are a lot of Texas Instruments SN74AUC2G66YZPR Analog Switches & Multiplexers ICs applications.

• Private Branch Exchange (PBX)
• Cable Modem
• DSLAMs
• RGB switches
• SDH/SONET multiplexers
• Microwave transmission systems
• Battery Powered Systems
• Cell phones
• High-Voltage
• FTTH