SN74CB3Q3306APWR Overview

This is a relatively small item of digital switch that is included in the 8-TSSOP (0.173, 4.40mm Width) in order to save space on the board.In this case, it is packaged as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74CB series, which provide extensive application potential.As part of its basic configuration, 8 terminations are designed as a part of it.Its logic switch base part number is 74CB3Q3306 which can also be used to find its logic switch related parts.For multiplexer's system, 2.5V voltage is supplied.Currently, this turn signal switch has a total of 8 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.This multiplexer ic has 8 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.In the signal multiplexer, there are 1 bits available.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceiver.It consumes 700μA current of multiplexer ic without external influences.TR is used to package the switches.A resistance of 2 is used to operate the signal switching.With a resistance of 9Ohm, it operates.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.For higher switches' flexibility, the output current is set to 30A.

SN74CB3Q3306APWR Features

Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

SN74CB3Q3306APWR Applications

There are a lot of Texas Instruments SN74CB3Q3306APWR Signal Switches / Multiplexers / Decoders applications.

• Night vision cameras
• To select different devices in microprocessor output
• Communication system
• Relay
• Transmission from the computer system of a satellite
• Video transmission
• Microprocessor instruction decoding
• Automatic Monitoring systems
• To select different task for memory in microprocessor memory systems
• Data bus control