SN74CB3Q3384APW Overview

Due to the lack of space on the board, digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.These multiplexers are members of the 74CB series, which provide extensive application potential.The basic configuration includes 24 terminations.There is a base part number of 74CB3Q3384 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 2.5V voltage is supplied.There are 24 component pins in this turn signal switch.As a result, conductors end at GULL WING.Single is used as its supply type.The board is configured with 24 pins.It is mounted in the way of Surface Mount.In the signal multiplexer, there are 10 bits available.Keeping Vsup at 3.6V will prevent some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 2mA current of multiplexer ic without external influences.2 is the resistance at which it operates.This signal switching operates at a resistance of 9Ohm.In addition, it provides improved features of ALSO OPERATES WITH 3.3V SUPPLY.The output current of 30mA is provided for higher switches' flexibility.

SN74CB3Q3384APW Features

Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
ALSO OPERATES WITH 3.3V SUPPLY

SN74CB3Q3384APW Applications

There are a lot of Texas Instruments SN74CB3Q3384APW Signal Switches / Multiplexers / Decoders applications.

• Night vision cameras
• Frequency multiplexing system
• To select different devices in microprocessor input
• Paper plants
• Microprocessor memory systems
• GLAN
• CNC machines
• Data bus control
• Data demultiplexing
• CPU memory location identification