SN74CB3T3245DWR Overview

Digital switch is provided in the 20-SOIC (0.295, 7.50mm Width) for the purpose of saving board space.In this case, it is packaged as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.As a member of 74CB series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 20 range.There is a base part number of 74CB3T3245 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 2.5V voltage is supplied.Signal switch has 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CB3T/3VT family.There are 8 bits signal multiplexer provides.Vsup should be kept at 2.3V to prevent some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.It is provided that 2.5/3.3V has a power supply in order to function normally.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 40μA current of multiplexer ic since it is not affected by external factors.TR is used to package the switches.2 ports are used for some other peripheral signal switchings to plug in.In terms of resistance, it has a value of 8.5Ohm.Additionally, ALSO OPERATES AT 3.3V SUPPLY has improved characteristics.The output current of 64mA is provided for higher switches' flexibility.

SN74CB3T3245DWR Features

Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES AT 3.3V SUPPLY

SN74CB3T3245DWR Applications

There are a lot of Texas Instruments SN74CB3T3245DWR Signal Switches / Multiplexers / Decoders applications.

• Electronics industry
• HDMI applications
• Recording transmission
• Automation system
• Idle motor
• Logic gates for other digital devices
• VGA
• Arithmetic Logic Units
• GLAN
• Textile mills