SN74CBT3244DBR Overview

It is included in the 20-SSOP (0.209, 5.30mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.The multiplexers from 74CBT series can be used for a wide range of applications.There are 20 terminations included in its basic configuration.Its logic switch base part number is 74CBT3244 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 20 component pins.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.It is configured with 20 pins.The mounting point is Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 8 bits.In order to maintain mux switch's normal operation, power is provided to 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 50μA current.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.A TR packaging method is used in the switches.As far as the resistance is concerned, it operates with 2.The system operates with a resistance of 7Ohm.For higher switches' flexibility, the output current is set to 64mA.

SN74CBT3244DBR Features

Supplied in the 20-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT3244DBR Applications

There are a lot of Texas Instruments SN74CBT3244DBR Signal Switches / Multiplexers / Decoders applications.

• Textile mills
• Automatic health monitoring systems
• CPU memory location identification
• HDMI applications
• Recording transmission
• Electronically controlled engine system
• To select different devices in microprocessor output
• Paper plants
• Make half adder
• Data bus control