SN74CBT3253CDR Overview

This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Multiplexer/Demultiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74CBT series, which provide extensive application potential.Among its basic configurations are 16 terminations.There is a base part number of 74CBT3253 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 16 components that can be connected to each pin.Conductors terminate at GULL WING in this design.In this case, Single is employed as the supply type.It is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer consists of 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.In order to maintain mux switch's normal operation, power is provided to 5V.The turn signal switch has 4 outputs.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.Without any external influences, it consumes 3μA current of multiplexer ic at all times.Supply voltages of 5V can provide reliable performance of the multiplexers.The switches package is packaged in a way which is consistent with TR.The system operates with a resistance of 12Ohm.Transmission is carried out over 2 channels in the turn signal switch's circuit.Providing the load with a supply voltage of 3μA can maintain stability of the multiplexers.

SN74CBT3253CDR Features

Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
Operating with the supply current of 3μA

SN74CBT3253CDR Applications

There are a lot of Texas Instruments SN74CBT3253CDR Signal Switches / Multiplexers / Decoders applications.

• Data-routing applications
• Idle motor
• Signal router
• High-performance memory systems
• Memory system of computers
• Data demultiplexing
• A/D converters
• Enabling different functions units in microprocessor instruction decoding
• Enabling different rows of memory depending on address in memory chips
• HDMI applications