Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74CBT6800CDBQRG4

SN74CBT6800CDBQRG4

SN74CBT6800CDBQRG4

Texas Instruments

24 Terminations4V~5.5V 24 Pin 74CBT6800 Signal switch74CBT Series 1 Functions

SOT-23

SN74CBT6800CDBQRG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SSOP (0.154, 3.90mm Width)
Number of Pins 24
Weight 129.500622mg
Operating Temperature-40°C~85°C
PackagingTape & Reel (TR)
Series 74CBT
JESD-609 Code e4
Pbfree Code no
Part StatusObsolete
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 24
Type Bus Switch
Resistance 12Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 4V~5.5V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch0.635mm
Base Part Number 74CBT6800
Pin Count24
Operating Supply Voltage5V
Circuit 10 x 1:1
Power Supplies5V
Supply Voltage-Min (Vsup) 4V
Number of Ports2
Nominal Supply Current3μA
Output Current64mA
Number of Bits 10
Propagation Delay240 ps
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current64mA
Low Level Output Current15mA
Voltage Supply SourceSingle Supply
Independent Circuits 1
Length 8.65mm
Width 3.9mm
Radiation HardeningNo
RoHS StatusROHS3 Compliant
Lead Free Contains Lead
In-Stock:1681 items

SN74CBT6800CDBQRG4 Product Details

SN74CBT6800CDBQRG4 Overview


Digital switch is provided in the 24-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.In this case, it is packaged as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBT series can be used for a wide range of applications.Among its basic features are 24 terminations.The base part number is 74CBT6800, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 5V is supplied.Signal switch has 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A total of 24 pins are configured on this board.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 10 bits that are provided.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.For mux switch's normal operation, power supply 5V is provided.Bus Driver/Transceivers is a category for the digital switch ics.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.As far as the resistance is concerned, it operates with 2.A resistance of 12Ohm is used to operate the signal switching.There is an output current of 64mA that allows for greater switches' flexibility.

SN74CBT6800CDBQRG4 Features


Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT6800CDBQRG4 Applications


There are a lot of Texas Instruments SN74CBT6800CDBQRG4 Signal Switches / Multiplexers / Decoders applications.

  • Night vision cameras
  • Automation system
  • Electronics industry
  • Injectors
  • Audio transmission
  • Signal router
  • Implementing boolean functions with multiple variables
  • Time division multiplexing system
  • HD surveillance system
  • Telephone network

Get Subscriber

Enter Your Email Address, Get the Latest News