Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74CBTD3306CPWRE4

SN74CBTD3306CPWRE4

SN74CBTD3306CPWRE4

Texas Instruments

8 Terminations 8 Pin Signal switch 2 Functions Min 4.5V V Max 5.5V V

SOT-23

SN74CBTD3306CPWRE4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Package / Case TSSOP
Number of Pins 8
Weight 39.008944mg
PackagingTape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Resistance 20Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch0.65mm
Pin Count8
Operating Supply Voltage5V
Power Supplies5V
Temperature GradeINDUSTRIAL
Number of Channels 2
Max Supply Voltage5.5V
Min Supply Voltage4.5V
Number of Ports2
Nominal Supply Current1.5mA
Current - Output 64mA
Number of Bits 1
Propagation Delay150 ps
Quiescent Current1.5mA
Turn On Delay Time4.7 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 20MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current-128mA
Low Level Output Current128mA
Length 4.4mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:3546 items

SN74CBTD3306CPWRE4 Product Details

SN74CBTD3306CPWRE4 Overview


Providing this information in the TSSOP enables digital switch board space to be saved.The package is in the form of Tape and Reel.There is a design for terminating 8 as part of its basic configuration.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 8 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 8 pins.It is positioned in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.The multiplexer ic provides 1 bits.Normally, 5V is powered by a battery.This is a signal switch that is categorized as Bus Driver/Transceivers.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.2 is the resistance at which it operates.This signal switching operates at a resistance of 20Ohm.A total of 2 channels are used for transmission in the turn signal switch's circuit.85°C is an acceptable maximum temperature for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Based on the device specifications, the signal switches is designed to operate at 5.5V maximum supply voltage.A minimum supply voltage of 4.5V is specified for the digital swith by its applicable specification.It uses IC BUS DRIVER for its logic.

SN74CBTD3306CPWRE4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC


SN74CBTD3306CPWRE4 Applications


There are a lot of Texas Instruments
SN74CBTD3306CPWRE4 Signal Switches / Multiplexers / Decoders applications.


  • Time division multiplexing system
  • Frequency multiplexing system
  • A/D converters
  • D/A converters
  • Implementing boolean functions with multiple variables
  • Data collection system
  • Audio transmission
  • Video transmission
  • Image transmission
  • Recording transmission

Get Subscriber

Enter Your Email Address, Get the Latest News