SN74CBTLV3245ADBQR Overview

Due to the fact that it is provided in the 20-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.There is a design for terminating 20 as part of its basic configuration.The base part number is 74CBTLV3245, which is also useful when looking up signal switch's related components.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemA component pin count of 20 is found on this turn signal switch.GULL WING represents the end of conductors.Its supply type is Single, which is used as the source of power.With 20 pins, it is configured.It is positioned in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.There are 8 bits in signal multiplexer.Keeping Vsup at 2.3V will prevent some unwanted failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.It consumes 20μA current of multiplexer ic without external influences.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.Currently, the switches is packaged in accordance with the TR method.The signal switching operates with a resistance of 2.With a resistance of 7Ohm, it operates.In addition, WITH DIRECTION CONTROL provides improved characteristics.For higher switches' flexibility, the output current is set to 64mA.

SN74CBTLV3245ADBQR Features

Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
WITH DIRECTION CONTROL

SN74CBTLV3245ADBQR Applications

There are a lot of Texas Instruments SN74CBTLV3245ADBQR Signal Switches / Multiplexers / Decoders applications.

• Make full adder
• Code converters
• Microprocessor memory systems
• Injectors
• Memory chips
• Video transmission
• Relay
• Small scale TV wall
• Seven segment displays
• Enabling block of memory depending on address in memory chips