SN74CBTLV3861PWG4 Overview
Providing this information in the TSSOP enables digital switch board space to be saved.There is a design for terminating 24 as part of its basic configuration.The multiplexer's system works with 2.5V voltage.In this turn signal switch, there are 24 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 24 pins.It is positioned in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.The multiplexer ic provides 10 bits.Normally, 2.5/3.3V is powered by a battery.In the absence of external influences, it consumes 10μA current of multiplexer ic.2 is the resistance at which it operates.This signal switching operates at a resistance of 40Ohm.85°C is an acceptable maximum temperature for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Based on the device specifications, the signal switches is designed to operate at 3.6V maximum supply voltage.A minimum supply voltage of 2.3V is specified for the digital swith by its applicable specification.It uses IC BUS DRIVER for its logic.
SN74CBTLV3861PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
SN74CBTLV3861PWG4 Applications
There are a lot of Texas Instruments
SN74CBTLV3861PWG4 Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Frequency multiplexing system
- A/D converters
- D/A converters
- Implementing boolean functions with multiple variables
- Data collection system
- Audio transmission
- Video transmission
- Image transmission
- Recording transmission
