SN74F175DR Overview

In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. It is included in the package Cut Tape (CT). T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis used as the supply voltage. In this case, the operating temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74F series. A frequency of 140MHzshould be the maximum output frequency. In total, there are 1 elements. During its operation, it consumes 34mA quiescent energy. It has been determined that there have been 16 terminations. Members of the 74F175family make up this object. A voltage of 5V is used to power it. This D flip flop belongs to the family of F/FAST. It is mounted by the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 1 Bits. The superior flexibility is achieved through the use of 4 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. The system runs on a power supply of 5V watts. For high efficiency, the supply voltage should be set to 5V. This T flip flop features a maximum design flexibility due to its output current of 20mA.

SN74F175DR Features

Cut Tape (CT) package
74F series
16 pins
1 Bits
5V power supplies

SN74F175DR Applications

There are a lot of Texas Instruments SN74F175DR Flip Flops applications.

• Matched Rise and Fall
• Data Synchronizers
• Asynchronous counter
• Power down protection
• Frequency Dividers
• Single Up Count-Control Line
• Divide a clock signal by 2 or 4
• Data transfer
• Supports Live Insertion
• Patented noise