IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A
Packing Method
TUBE
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Pin Count
20
Operating Supply Voltage
5V
Number of Elements
1
Polarity
Non-Inverting
Power Supplies
5V
Temperature Grade
COMMERCIAL
Number of Channels
8
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Load Capacitance
50pF
Number of Ports
2
Number of Bits
8
Propagation Delay
9 ns
Turn On Delay Time
9 ns
Family
F/FAST
Logic Function
Inverting, Transceiver
Direction
Bidirectional
Output Characteristics
3-STATE
Logic IC Type
BUS TRANSCEIVER
Max I(ol)
0.064 A
Prop. Delay@Nom-Sup
7 ns
High Level Output Current
-15mA
Low Level Output Current
64mA
Control Type
COMMON CONTROL
Translation
N/A
Height
2.35mm
Length
12.8mm
Width
7.52mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
SN74F245DWG4 Product Details
SN74F245DWG4 Overview
There is a neat SOIC package used in buffer. A total of 1 elements are used. 20 terminations with different functions are available on this transceiver. An input voltage of 5V is required. F/FAST family part. With the electrical part, 20 pins are set. Surface Mount applications are suitable for it. There are 20 pins on digital buffer. The bus transceiver has 2 ports. Power supplies with a 5V volt rating are recommended. The package is usually shaped like a TUBE. Users should apply 5V supply voltage to the lectronic component to run it safely and stably. 8 efficient bits are included in the package of the network transceiver. For better service, buffer includes IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A. High-quality communication is provided by 8 channels on thisnetwork transceiver. As low as 0°C can be tolerated by it. You shouldn't let the amibient temperature get higher than 70°C when using this buffer. It outputs 64mA when it is in low-level mode, which is the default. There is a possibility of the electronic component conducting -15mA of current when it is in high-level output mode. It is recommended that the voltage used to run this electrical component is at least 4.5V. It is rated for a maximum supply voltage of 5.5V. ICs that use BUS TRANSCEIVER logic are known as BUS TRANSCEIVER logic transceivers. COMMON CONTROL control technology allows the logical driver to start up.
SN74F245DWG4 Features
IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A High Level Output: 64mA Low Level Output: -15mA BUS TRANSCEIVER Logic IC
SN74F245DWG4 Applications
There are a lot of Texas Instruments SN74F245DWG4 Buffers & Transceivers applications.