SN74GTLPH306PWE4 Overview

There is an embedded version of it in package TSSOP.As part of the transmission line termination process, there are a total of 24 terminations.In order to power the device, a voltage supply of 3.3V is required.The pin count of this device is 24.There are 24 pins on it.There are 8 bits in this electronic part.The supply voltage is limited to 3.45V.In order for the machine to operate, the supply voltage must be 3.15V.This mount is done using the method of Surface Mount.1 channels are available.This object belongs to the category of Bus Driver/Transceivers.There is a logic IC BUS TRANSCEIVER used in the system.2 terminations are possible, which each match the transmission line's characteristic impedance.This electronic device belongs to the family of GTLP.This device has been rated to be suitable for TUBE based upon the reliability of its performance.Optimal efficiency requires 3.3V as the supply voltage.The operating temperature should be higher than -40°C.Operating temperatures should be below 85°C.This device features maximum design flexibility due to its output current of 50mA.There can be only 175MHz frequency achieved.

SN74GTLPH306PWE4 Features

TSSOP package
24 pin count
24 pins

SN74GTLPH306PWE4 Applications

There are a lot of Texas Instruments SN74GTLPH306PWE4 voltage translators & level shifters applications.

• Driving Indicator LEDs or Buzzers
• Eliminate Slow or Noisy Input Signals
• Telecommunications
• Desktop PC
• Telecom
• Personal Electronics
• Push-pull level shifting (UART, SPI, JTAG, and so forth)
• Extended Product Life Cycle
• Controlled Baseline
• Handset