SN74HC166DBRE4 Overview

There is an embedded device in the package SSOP. 16 is the sum of the number of terminations in the chip. The case Tape and Reel contains it. A voltage of 5V is specified for the part's operating supply. It is a part that has 1 elements on it. 16 pins are available on the device. Surface Mount is recommended for mounting. Electronic components belong to the HC/UH group. In terms of supply voltage, this chip operates within the range of 5V. This section has the following additional features: SISO OPERATION ALSO AVAILABLE. As far as the device is concerned, there are 9 input lines available. IC chips contain a total of 8 bits. There are a total of 16 pins on it. Under temperatures below 85°C, it is recommended to use it. This device should not be operated with a value lower than -40°C. A voltage of this type is employed under 6V. It is necessary to use a voltage that is higher than 2V to provide this supply. This subcategory falls under the Shift Registers category.

SN74HC166DBRE4 Features

With 16 pins
Operate supply voltage at 5V

SN74HC166DBRE4 Applications

There are a lot of Texas Instruments
SN74HC166DBRE4 Shift Registers applications.

• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter
• Data manipulation
• Delay Line
• Generate time delay toward digital circuits
• Parallel data
• Parallel to serial converter